Best Outdoor Antenna For Bobcat Miner : Review And Buying Guide

✔️ 8dBi gain at 915MHz, 3.6ft, SWR ≤ 1.5, 902MHz - 928MHz, Antenna Connector:N-Male， Impedance: 50 Ohm

✔️KMR240 cable lenth: 10Ft, Connector:N Male to RP-SMA Male, 915Mhz attenuation:0.24dBi/M

✔️ Boost quantity of witnesses and HNT crypto rewards

✔️ Compatible with all popular helium miner hotspot: BOBCAT miner 300, NEBRA HNT Indoor/Outdoor Hotspot Miner, RAK V2 Hotspot Miner

✔️ Application scenarios: Helium miner, Low Data Rate Communication Networks, Long Distance LoRa Nodes, IoT & M2M Nodes, Industrial & Environmental Monitoring, Smart Metering Applications, Inventory Tracking, Vending Machine Data & Monitoring, LoRaWAN, Multipoint and NLOS Applications, Wireless Video and Security Systems

✔️ Packing list: 1 x 8dBi fiber glass antenna, 1 x SMA Male to RP-SMA Female Adaptor, 1 x 10ft KMR240 Low-Loss Extention Cable, 1 x U-bolt

✔ Increase Helium Miner Signal: Enhances signal strength and coverage over stock antennas to get more witnesses for more HNT rewards. *For best performance, always select proper dbi based on your surrounding location - refer to infographic. [Cables sold separately]

✔ Premium Device Protection: Lightning Arrestor Included. Protects all devices connected to your antenna from lightning strikes; from amplifier/signal boosters to helium miners, provide a safety measure for your investments. Replaceable standard 90V gas discharge tube allows continuous after surge protection. [Cables sold separately]

✔ Outdoor Reliability: Ideal for highest outdoor placement. Heavy-duty Fiberglass body and nickel-plated base can sustain any weather condition. Pure copper core delivering the highest antenna signal transmission. [Cables sold separately]

✔ Compatible With All Miners: Nebra, Rak, Bobcat, Syncrob, and Sensecap with frequency range for North America 860-930 MHz (915Mhz). Raigen-400 Connectors; N Female to RP-SMA male. Raigen Antenna Connector; N Male. [Cables sold separately]

✔ Antenna Bundle: 1 x fiberglass antenna (N-type male), 2 x installation mounts, 1 x Raigen lightning arrestor. Connecting cable from miner to antenna not included. This bundle allow you to select your preferred cable length for your unique setup. Raigen-400 cables recommended. [Cables sold separately]

✔️ 900MHz - 930MHz

✔️ 8.3 dBi gain at 915MHz

✔️ Boost HNT crypto rewards

✔️ Compatible with all popular helium miner hotspot: BOBCAT miner 300, NEBRA HNT Indoor/Outdoor Hotspot Miner, RAK V2 Hotspot Miner, Syncrob, Sensecap, MNTD

✔️ Application scenarios: Helium miner, Low power radio ( Sigfox, LPWA, LoRa), mesh networks, IoT

✔️ Packing list: 1 x fiber glass antenna 2 x installation mounts 1 x 3Ghz N-male to N-female lightning arrester

✔️ 100% satisfaction guarantee. Please contact us if you have any question.

Support all of brand miner -RAK2 Nebra Bobcat EasyLinkIn Syncrob helium miner . It can enhance the signal strength and signal coverage, and make miner get more witnesses and more hNT rewards

Helium HNT Miner Bobcat Nebra RAK Syncrob 915mhz LoRa Antenna -Frequency ：824MHz - 960MHz.support 915mhz .Gain : 12dbi (915mhz )，higher the gain ,more suitable for miner ,get more witnesses and more hNT rewards

Features: long distance omnidirectional coverage, industrial grade construction, durable fibreglass radome, all weather operation and integral N-female connector.

Higher the gain ,More signal coverage More witnesses ,More HNT rewards

Packing Listing : 1xAntenna & 1set U-clip code,& Cable: N female to RP-SMA female With 3 meter Low Loss RG142; Adapter: RP-SMA Female to SMA female

【Use Cases】 - 👉[Urban Area], 👉[Suburban Area], 👉[High Hotspots Density Area]. 👉【Higher dbi rating antenna is not always better, this Antenna outperforms 5.8dbi and 8dbi Antenna in some use cases】

【Optimize HNT Earnings】 - 👉[Great in witnessing and being witnessed by close hotspots and distant hotspots] - [Improvement in SNR readings for both beacons and witness]

【Features】 - Antenna Height: 36cm/14.17inch; Direction: Omni-directional; Frequency Range: 900MHz - 930 MHz (915MHz); Strong fiberglass antenna cover, durable, anticorrosive, sealed well and waterproof

【Note】- Crimp in cable may causing poor performance, please do not crimp the cable. 【Packing List】 1x helium antenna(N male Connector); 1 x 10ft Ultra Low Loss ALSR240 extention cable(N Female to RP-SMA Male); 1 x Adapter (RP-SMA Female to SMA Male); 2 x U-Bolts (Pole is not included)

【Application】 - Compatible with all helium miner hotspot: Nebra HNT Indoor/Outdoor Hotspot Miner, RAK V2 Hotspot Miner, BOBCAT Miner 300, SyncroBit Gateway, SenseCAP M1, Sensecap MX, Kerlink helium miner lora gateway, Helium Miner crypto, lora camera, designed for HNT Rewards Bitcoin Miner LoRa Helium mining, Low power radio: Sigfox, LPWA, LoRa, mesh networks, IoT Application

【After-Sales】- We focus on product quality and value the shopping experience of each customer highly. If you have any questions, please feel free to contact us, your satisfaction is our priority.

Increase Helium Miner Signal: Enhances signal strength and coverage over stock antennas to get more witnesses for more HNT rewards. *For best performance, always select proper dbi based on your surrounding location (refer to infographic).

Low Loss Cable: Bundled with our "updated" highest performing Raigen-400 cable, 50 Ohm Coaxial, 5ft long for optimal signal transmission. Constructed with copper clad aluminum conductor and double shielding protected UV proof PVC jacket, out-performing lower quality RG58 cables up to 3-4x. Weather proof design for indoor/outdoor use.

Compatible With All Miners: Nebra, Rak, Bobcat, Syncrob, and Sensecap with frequency range for North America 860-930 MHz (915Mhz). Raigen-400 Connectors; N Female to RP-SMA male. Raigen Antenna Connector; N Male.

Outdoor Reliability: Heavy-duty Fiberglass body and nickel plated base can sustain any weather condition. Pure copper core delivering the highest antenna signal transmission.

Optimize Your Performance: A higher dbi is not always better. Choose a lower dbi antenna if you’re surrounded by tall buildings and higher dbi if you have a clear view, free from obstruction. Mount antenna to the highest location, preferably on the roof or attic.

915MHz (AU915)

8dBi .

Works for all helium miner hotspot ,as BOBCAT 300 ,NEBRA ,RAK ,Syncrob ,Sensecap ,FreedomFI ,LinxDot ,sensecap ,syncrobit ,etc .

Install Remind ：any antenna is heavily dependent on the surroundings. please take into considerations, hight, location,building clearance, line of sight, Issues with the blockchain wide system ,type of hotspot used etc.

Updating antenna in helium app :please choose "custom" and input "signalplus".

100% satisfaction promise. Please contact us If you have any suggestion /questions about the product or unfortunately get a defective one.

Package :1pcs lora antenna + 1pcs 5meter RG58 Cable + 1pcs adapter + 1set bracket .if need the lighting arrest and the LMR400 cable or other antenna ,you can visit my Amazon store and order.

Frequency Range:902MHz - 928MHz. Gain:5.8dBi; Antenna Connector:N-Male; Impedance:50 ohm; SWR≤1.5; Antenna Length: 31.5inch/80cm;

Ultra Low Loss Cable:3 Meter(10ft) Long N Female to RP-SMA Male Low Loss KMR200 Cable Allowing Install The Antenna indoor/outdoor; Adapter RP-SMA Female to SMA Male;

Industrial Grade Construction Design, Quality Build and Durable Fiberglass Finish Make it More Suitable for All-Weather Operation. Built-in Pure Copper Oscillator for Performance Ultra Distance Signal Transmission.

Works with Most of LoRa IoT Application to get more witnesses for more HNT rewards.. Compatible with RAK Bobcat HNT Hotspot Miner, Helium HNT Mining, Low Data Rate Communication Networks, Long Distance LoRa Nodes, IoT & M2M Nodes, Industrial & Environmental Monitoring, Smart Metering Applications, Inventory Tracking, Vending Machine Data & Monitoring, LoRaWAN, Multipoint and NLOS Applications, Wireless Video and Security Systems.

Packing List: Glass Fiber Antenna X 1; Mount Kit X 1; 3 Meter KMR200 Cable X 1; SMA Adapter X 1

Frequency Range:902MHz - 928MHz. Gain:8dBi; Antenna Connector:N-Male; Impedance:50 ohm; SWR≤1.5; Antenna Length: 43.3inch/110cm;

Ultra Low Loss Cable:3 Meter(10ft) Long N Female to RP-SMA Male Low Loss KMR200 Cable Allowing Install The Antenna indoor/outdoor; Adapter RP-SMA Female to SMA Male;

Industrial Grade Construction Design, Quality Build and Durable Fiberglass Finish Make it More Suitable for All-Weather Operation. Built-in Pure Copper Oscillator for Performance Ultra Distance Signal Transmission.

Works with Most of LoRa IoT Application to get more witnesses for more HNT rewards.. Compatible with RAK Bobcat HNT Hotspot Miner, Helium HNT Mining, Low Data Rate Communication Networks, Long Distance LoRa Nodes, IoT & M2M Nodes, Industrial & Environmental Monitoring, Smart Metering Applications, Inventory Tracking, Vending Machine Data & Monitoring, LoRaWAN, Multipoint and NLOS Applications, Wireless Video and Security Systems.

Packing List: Glass Fiber Antenna X 1; Mount Kit X 1; 3 Meter KMR200 Cable X 1; SMA Adapter X 1

✔ Increase Helium Miner Signal: Enhances signal strength and coverage over stock antennas to get more witnesses for more HNT rewards. *For best performance, always select proper dbi based on your surrounding location, refer to info-graphic. [Cables sold separately]

✔ Compatible With All Miners: Nebra, Rak, Bobcat, Syncrob, and Sensecap with frequency range for North America 860-930 MHz (915Mhz). Raigen-400 Connectors; N Female to RP-SMA male. Raigen Antenna Connector; N Male. [Cables sold separately]

✔ Outdoor Reliability: Heavy-duty Fiberglass body and nickel-plated base can sustain any weather condition. Pure copper core delivering the highest antenna signal transmission. Low VSRW <1.5. [Cables sold separately]

✔ Optimize Your Performance: A higher dbi is not always better. Choose a lower dbi antenna if you’re surrounded by tall buildings and higher dbi if you have a clear view, free from obstruction. Mount antenna to the highest location, preferably on the roof or attic. [Cables sold separately]

✔ Antenna Bundle: 1 x fiber glass antenna (N-type male), 2 x installation mounts. Connecting cable from miner to antenna not included. This bundle allow you to select your preferred cable length for your unique setup. Raigen-400 cables recommended. [Cables sold separately]

【Why choose 5.8dBi】5.8dBi antenna is most suitable for Urban Area, Suburban Area, High Hotspots Density Area, Upgrade your Helium Hotspot with this 5.8 dbi gain 915 MHz antenna! Proven to increase your Helium Hotspot radius and allow you to gain additional Helium per day!

【Center 915MHz】This Antenna is tuned to operate with peak performance for the US915 band. The other Antennas you see out there that say 860Mhz-930Mhz is wide band and will not perform as well as one that is tuned for the US. This is designed for outdoor environments and is weather proof.

【Application】Compatible with all 915MHz helium miner hotspot, Long Distance LoRa Nodes, LoRaWAN, Indoor/Outdoor RAK V1 V2 Nebra Bobcat 300 EasyLinkIn SenseCAP M1 & SyncroB.it Finestra MNTD Kerlink Helium Hotspot HNT Miner Mining etc.(915MHZ versions only).

【Features】Gain: 5.8dBi; Antenna Height:42cm/16.5inch; Direction: Omni-directional; Frequency Range: 900MHz - 930 MHz (Center 915MHz); V.S.W.R: ＜1.5; fiberglass material.

【Packing List】1*5.8dBi Fiberglass Antenna, 1* 10ft Low loss #200 Cable，1* Adapter，1* Mount.

【After-Sales】Never worry about any security problems. We are confident in the quality of our Antenna, You only need to spend a few days to verify, We willing to provide 1 MONTHS Replacement refund and 100% Satisfaction Guarantee.

Applicable to all miner brands :AU915 linxdot hotspot ,Rak Miner 2v, kerlink wirnet ifemtocell miner, cotx-X3 heluim miner ,LinxDot ,FreedomFI ,bobcat 300 ,finestra miner ,sensecap,syncrobit, etc .

Frequency Range：824MHz - 960MHz.support 868mhz 915mhz 924mhz.Gain :5.8dBI @915MHz . Impedance: 50 Ohms. Maximum Power: 50W. Horizontal Beamwidth: 360 Degrees.

Material ：(antirust) the antenna is made of fiberglass. The antenna structure inside is made of copper.The copper (element) tube is better than the circuit board. The copper (element) tube enables the antenna to obtain lower VSWR and withstand higher power.

Inside /Outside /omnidirectional/Waterproof/Snow : You could put it inside if you need but outside would be even better.
the cable and antenna is designed to be waterproof and will last all seasons outdoors.
Generally, the working ambient temperature can be: - 40 ° C to + 55 ° C,it work in the rain/snow.

Use skills:Any antenna is heavily dependent on the surroundings.To achieve better results you may have to move around your hotspot and antenna（height and location of the installation）until you determine a sweet spot that gives you the best rewards.You must take into considerations, antenna hight, location,building clearance, line of sight, Issues with the blockchain wide system ,type of hotspot used etc.

Lightning arester:If you need to mount the antenna on a roof or very high, and you are in a lightning-prone area, it is recommended to install a lightning arrester.if you need you can buy it in my Amazon store.

if need the lighting arrest and the LMR400 cable or other antenna ,you can enter my store and order.

Packing Listing : 1xAntenna &1x 3meters (10foots) RG58 cable &1XRP-SMA adapter & 1set U-clip code

This Omnidirectional antenna is for 900-930 Mhz LoRa/LoRaWAN antenna center tuned to 915 Mhz. It is compatible with all helium miner hotspot: Nebra HNT Indoor/Outdoor Hotspot Miner, RAK V2 Hotspot Miner, BOBCAT Miner 300, SyncroBit Gateway, SenseCAP M1, Sensecap MX, Kerlink helium miner lora gateway, Helium Miner crypto, lora camera, designed for HNT Rewards Bitcoin Miner LoRa Helium mining, Low power radio: Sigfox, LPWA, LoRa, mesh networks, IoT Application

Our 5dBi 915 Mhz low profile 16" fiberglass antenna with N-male connector including an RP-SMA male to N-female coaxial cable and U-bolt bracket mount. This is certified and designed for outdoor environments and is weatherproof. Plus it has better wind resistance due to its smaller surface area.

It' has been tested on Urban Area, Suburban Area], High Hotspots Density Area, Higher dbi rating antenna is not always better, this Antenna outperforms 5.8dbi and 8dbi Antenna in some use cases and it will Optimize HNT Earnings, Great in witnessing and being witnessed by close hotspots and distant hotspots and Improvement in SNR readings for both beacons and witness.

This antenna does ship with a cable. an N to RP-SMA interface extension cable to connect the antenna to an RP-SMA connector.1.64ft length, RG316.RP-SMA male connector on one end and an N female connector on the other end.Includes 2 U bolts and mounting bracket as pictured, plus antenna. This is NOT a WiFi antenna or 4G cellular antenna, it is ONLY for 915 Mhz sub 1 GHz HaLow or LoRa application, or other applications this band.

35-degree vertical beamwidth, 360 degrees horizontal, N-male connector. VSWR ≤ 1.5 with 5 dBi gain, 50-ohm impedance, max input power 50W, made of Fiberglass, Copper, and Aluminum Alloy

The material of the original N to RP-SMA interface extension cable to connect the antenna is RG316, you also could buy an LMR400 cable to replace it.

The gain of this for Helium antenna is 6dBi, but it will have some loss if we install the cable, After the test by installing the cable, we confirmed it will not be less than 5dBi so we just marked it as a 5dBi antenna, And if you have lmr400 cable of appropriate length the loss will be insignificant,

【Increase Helium Witnesses and Earnings】Increase range coverage, improve witness and bring more rewards by mounted RHsia hnt antennas outdoors on roofs or attics. It's necessary to replaces Helium miner original stock antenna with an external high gain antenna high enough to bypass all of these solid items that blocks the signal.

【Choose Right LoRa Antenna】Different dBi antenna gains will be needed in different situations. Higher gain antennas are not always beneficial. 5.8 dBi antenna kit for RHsia suitable for installation in suburban, urban areas with moderate hotspot density. Please choose the right gain antenna according to the display distribution of the helium detector.

【Ultra Low Loss Coaxial Cable】Our hnt antenna 5.8dBi kit come with 10ft Long N Female to RP-SMA Male LMR200 low loss cable. An RP-SMA Female to SMA Male adapter included for more adaptation. It has better performance than RG series models and can reduce the gain loss caused by the line. LMR200 decay rate ~0.08dBi/ft loss at 900Mhz compare RG58 ~0.18dBi/ft loss. Please consider replacing with a better performance coaxial cable like LMR400 for better coverage if the installation length exceeds 25ft.

【Detailed Parameters】902MHz - 928MHz. Gain: 5.8dBi; Antenna Connector: N-Male; Impedance: 50 ohm; SWR≤1.5; Antenna Length: 16.5 inch/41cm.

【Application】Compatible with all helium miner hotspot RAK v2, Nebra Hotspot Miner, Bobcat MINER 300, SenseCAP M1, SyncroB.It, MNTD Miner, Miniq, Kerlink, MerryIoT, Milesight LoRaWAN, LongAP, Hummingbird, Linxdot Hotspot, LoRa nodes, LoRa WAN.

【Packing List】: 1*Fiberglass Antenna,10FT low loss LMR 200 Cable, 1*SMA adapter, clamp bracket with 2 U-Bolts (Pole is not included).

【Why choose 8dBi】8dBi antenna is most suitable for Suburban Area, wide open spaces, Low/moderate Hotspots Density Area, Upgrade your Helium Hotspot with this 8dbi gain 915 MHz antenna! Proven to increase your Helium Hotspot radius and allow you to gain additional Helium per day!

【Application】Compatible with all 915MHz helium miner hotspot, Long Distance LoRa Nodes, LoRaWAN, Indoor/Outdoor RAK V1 V2 Nebra Bobcat 300 EasyLinkIn SenseCAP M1 & SyncroB.it Finestra MNTD Kerlink Helium Hotspot HNT Miner Mining etc.(915MHZ versions only).

【Center 915MHz】This Antenna is tuned to operate with peak performance for the US915 band. The other Antennas you see out there that say 860Mhz-930Mhz is wide band and will not perform as well as one that is tuned for the US. This is designed for outdoor environments and is weather proof.

【Features】Gain: 8dBi; Antenna Height: 110cm/43inch; Direction: Omni-directional; Frequency Range: 900MHz - 930 MHz (Center 915MHz); V.S.W.R: ＜1.5; fiberglass material. 【Packing list】1*8dBi glass fiber antenna, 1*32.8ft low loss cable, 1*adapter, 1*lightning arrester, 1*mounting bracket.

【After-Sales】Never worry about any security problems. We are confident in the quality of our Antenna, You only need to spend a few days to verify, We willing to provide 1 MONTHS Replacement refund and 100% Satisfaction Guarantee.